Pembuatan Trainer Board Astable Multivibrator (AM) sebagai Media Pembelajaran

Main Article Content

Syifaul Fuada

Keywords

Abstract

Trainer board is a modelling device approach which has related function or same with real pheneonom, it was designed for upgrading the cognitive and the psychomotoric ability of students in a practical courses understanding and applicating concepts.  This research goals is to make a trainer board of Astable Multivibrator oscillator, we hope that this learning tools can help them in facilitate to learn Astable Multivibrator characteristics as well as laboratories insfrastructure need. The method in design and implement this trainer board is prototyping and assembling with several approach steps, i.e. identification; simulation; experiment, design process; fabrication; and finally is testing. The results show that the trainer board which designed is appropriate with the theorem.

Keywords : Astable Multivibrator, IC OP-AMP, Trainer board


AbstrakTrainer board merupakan suatu pemodelan dalam bentuk benda/objek yang memiliki fungsi sama dengan fenomena nyata, dibuat dengan tujuan untuk meningkatkan kemampuan secara aspek kognitif dan psikomotorik dalam mempelajari suatu pembelajaran berbasis praktik. Penelitian ini bertujuan untuk membuat trainer board yang diharapkan dapat membantu memudahkan peserta didik dalam memahami karakteristik Astable Multivibrator berbasis IC OP-AMP sekaligus sebagai pemenuhan kebutuhan labolatorium. Metode yang digunakan dalam penelitian ini adalah prototyping and assembling dengan beberapa tahap pendekatan yakni: Identifikasi, simulasi, eksperimen percobaan, proses desain/perancangan, fabrikasi dan testing. Hasil penelitian menunjukkan bahwa trainer board yang telah dibuat sesuai dengan teorema.

Kata Kunci : Astable Multivibrator, IC OP-AMP, Trainer board


References

[1] Aakash S. S., K. Ganesan and Ashwin R., “Smart Pill Box,” Indian Journal of Science and Technology, Vol. 8(2), pp. 189–194, January 2015.
[2] Vijayaraghavan S., Vijayalakshmi T. G., Swathi V., “Ultrasonic Sensor Animal Safety System,” Proc. of IEEE Int. Conf. on Recent Advances and Innovations in Engineering (ICRAIE-2014), pp. 1-2, May 2014.
[3] M. Taufiq T., Arif J. T., “Fan Controlling Based On Inverter Technology,” Techno, Vol. 13(1), pp. 52-56, April 2012 .
[4] Animesh G., Urmila T., “PWM Based Speed Control of DC Motor,” Int. Journal of Advanced Scientific and Technical Research, Vol.1(3), pp. 648-658, 2013
[5] Phila D, Bidayatul A., Wira B.H., "Rancang Bangun Alat Elektronik Pengusir Hama Tikus pada Rumah Tangga.", 2008, Tersedia di: http://repository.unhas.ac.id/handle/123456789/4258/
[6] L. Pîslaru D., A.M. Morega, “Electronic Drive System of a Linear Magnetostrictive Motor Designed for Outer Space Applications,” Proc. of The 9th Int. Symposium on Advanced Topics in Electrical Engineering, pp. 225-230, May 2015.
[7] Rajender K., Krishan K, “PSPICE and MATLAB/SimElectronic Based Teaching of Linear Integrated Circuit: A New Approach,” Int. Journal of Electronics and Electrical Engineering, Vol. 3(1), pp. 34-37, February 2015.
[8] Luis B. O., Nuno P. and Nuno P., “The design of a Light Barrier System as an Undergraduate Laboratory Project,” Proc. of Int. Symposium on Circuits and Systems (ISCAS), pp. 2425-2428, June 2014.
[9] S. Fuada, Pengujian Trainer Oscilator Wien Bridge dengan Menggunakan Osciloskop dan Frekuensi Counter. Prosiding Seminar Nasional Teknologi Informasi dan Aplikasinya, Vol.6, pp. A32-A36, Juni 2015.
[10] S. Fuada, H. Elmunsyah, Suwasono, “Design and Fabrication of LC-Oscillator Tool Kits Based Op-Amp for Engineering Education Purpose,” TELKOMNIKA Indonesian Journal of Electrical Engineering, Vol. 17(1), pp. 88-100, January 2016.
[11] S. Fuada., “Pengujian Validitas Alat Peraga Pembangkit Sinyal (Oscillator) untuk Pembelajaran Workshop Instrumentasi Industri”. Prosiding Seminar Nasional Pendidikan (SEMNASDIK), pp.854-861, November 2015.
[12] S. Fuada, and F.T. Aquari, “Square wave generator circuit analysis using matlab approach,” Int. Journal of Engineering Sciences and Research Technology, Vol.2(2), pp. 371-382, February 2013.