Simulasi Robot Manipulator 4 DOF Sebagai Media Pembelajaran dalam Kasus Robot Menulis Huruf
Main Article Content
Keywords
Abstract
Industrial area has been widely used robotics technology to perform various work. Robotic technology is used because it allows the activity of human work. One of robotics technology in the industry namely robot manipulator. An operator needs to learn about operations and process of robotic manipulator system to use the robot. This research results a simulated robot manipulator with four degrees of freedom, for example a robot write letters using methods “cubic trajectory”. The motivation of this research is based on the use of robot manipulators in the Robotics Laboratory of the Faculty of Computer Science UNSRI as a teaching materials of robotics introduction course. This robot simulation can provide knowledge for learners to understand the robot manipulator path planning. The result of robot simulation runs well and the robots can write capital vowel patterns which are given.
Keywords : Cubic trajectory, Robot manipulator, Simulation.
Abstrak— Dalam area industri telah banyak digunakan teknologi robotika untuk melakukan berbagai pekerjaan. Teknologi robotik dimanfaatkan karena memudahkan aktivitas pekerjaan manusia. Salah satu teknologi robotika dalam industri yaitu robot manipulator. Seorang operator perlu mempelajari tentang operasi dan proses dari sistem robot manipulator supaya dapat menggunakan robot tersebut. Penelitian ini menghasilkan simulasi robot manipulator dengan empat derajat kebebasan, contoh kasusnya robot menulis huruf menggunakan metode cubic trajectory. Adapun motivasi dari penelitian ini pada dasarnya untuk menggunakan robot manipulator yang ada di Laboratorium Robotika Fakultas Ilmu Komputer UNSRI sebagai bahan ajar matakuliah robotika. Simulasi robot ini dapat memberikan pengetahuan kepada peserta didik untuk memahami perencanaan jalur pada robot manipulator. Hasil simulasi robot berjalan dengan baik dan robot dapat menuliskan pola huruf vokal kapital yang diberikan.
Kata Kunci : Cubic trajectory, Robot manipulator, Simulasi.
References
[2] Darwison, Rusydi, M.I., dan Bentar. Kontrol Posisi Robot Manipulator Planar Tiga Derajat Kebebasan Berbasis Visual. Jurnal Nasional Teknik Elektro. Vol. 2, no. 1 (2013).
[3] Ramya, V., Palaniappan, B., dan Akilan, T. Embedded System for Robotic Arm Movement Control Using Web Server and Zigbee Communication. International Conference on Research Trends in Computer Technologies, ICRTCT, pp. 30-34, (2013).
[4] Biagiotti, L., dan Melchiorri, C. Trajectory Planning for Automatic machines and Robots, Springer, Germany, (2008).
[5] Rendyansyah, Passarella, R., dan Exaudi, K. Aplikasi Linier Trajectory Planning Pada Simulasi Pergerakan Robot SCARA 3 DOF Dalam Menulis Huruf. Proceeding Annual Research Seminar, vol. 1, no. 1, (2015).
[6] Li, S., Weng, C., Chen, Y., Lo, C., Yang, M., Lin, Y., Hsieh, M., and Wong, C. Servo Motor Controller Design for Robotic Manipulator. IEEE International Symposium on Intelligent Signal Processing and Communication System (ISPACS), pp. 254-257, (2012).
[7] Rivai, M., Rendyansyah dan Purwanto, D. Implementation of Fuzzy Logic Control in Robot Arm for Searching Location of Gas Leak. International Seminar on Intelligent System and Its Applications, (2015).
[8] Khare, R., Sapra, A., Gupta, I., Kumar, V., Khare, A., Wig, T., dan Chawla, M., Robotics, Infinity Science, New Delhi, (2007).
[9] Biagiotti, L., dan Melchiorri, C. Trajectory Planning for Automatic machines and Robots. Springer, Germany, (2008).
[10] Faris, M. F., Triwiyatno, A., dan Setiawan, I. Perancangan Arm Manipulator 4 DOF Dengan Menggunakan Pengendalian Cartesian Space-Trajectory Planning. Transient, vol 1. No. 4, hal 151-158, (2012).
Article Sidebar
Article Details
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
The authors declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.