Pemanfaatan Sensor Inframerah untuk Input Kontrol Prediktif Temperatur pada Mesin Air Conditioning (AC) secara Wireless
Main Article Content
Keywords
Abstract
Air Conditioning (AC) is used every day in buildings. AC dominates energy consumption of a building. This research aims to reduce AC energy consumption by controlling the room temperature between 22,8°C to 27,1°C. The air conditioning machine is controlled by a working time predictive system that based on number of people in the room. The predictive control is success in maintained room temperature in comfortable temperature i.e. between 24,6° C to 27,1° C.
Keywords : Air Conditioning, Predictive Control and Arduino
Abstrak
Mesin pendingin ruangan (AC) semakin lazim digunakan sehingga konsumsi energi dari AC mendominasi kebutuhan energi pada gedung. Penelitian ini bertujuan untuk mengurangi konsumsi energi AC dengan cara mempertahankan suhu ruangan antara 22,8°C sampai 27,1°C menggunakan sistem kontrol prediksi waktu kerja yang didasarkan pada jumlah orang di dalam ruangan. Hasil yang didapatkan dengan kontrol prediktif tersebut, suhu dalam ruangan berhasil dijaga stabil pada suhu nyaman yaitu antara 24,6°C sampai 27,1°C.
Kata Kunci : Pendingin Ruangan, Kontrol Prediktif dan Arduino
References
SNI 03-6572-2001, “Tata cara perancangan sistem ventilasi dan pengkondisian udara pada bangunan gedung.” Badan Standardisasi Nasional, 08-Aug-2001.
D. Kurnianto, A. M. Hadi, and E. Wahyudi, “Perancangan Sistem Kendali Otomatis pada Smart Home menggunakan Modul Arduino Uno,” J. Nas. Tek. ELEKTRO, vol. 5, no. 2, pp. 260–270, Jul. 2016.
S. Shafiudin, F. J. Rohma, A. E. Prasetya, and R. Firmansyah, “Pemantauan Ruang Inkubator Penetasan Telur Ayam Dengan Berbasis Telemetri Menggunakan Arduino Uno R3,” J. Nas. Tek. ELEKTRO, vol. 5, no. 1, pp. 26–35, Mar. 2016.
R. J. Dossat and T. J. Horan, Principles of Refrigeration, 5 edition. Upper Saddle River, N.J: Pearson, 2001.
E. Karyanto;, Penuntun praktikum: TEKNIK MESIN PENDINGIN (PERKAKAS-PENGISIAN, BRAZING, ARUS PUTAR , STATIKSHOW CASE). Restu Agung, 2004.
Y. M. Dinata;, Arduino Itu Pintar. Elex Media Komputindo, 2016.
A. K. Tsauqi et al., “SAKLAR OTOMATIS BERBASIS LIGHT DEPENDENT RESISTOR (LDR) PADA MIKROKONTROLER ARDUINO UNO,” Pros. Semin. Nas. Fis. E-J., vol. 5, pp. SNF2016-CIP-19–24, Oct. 2016.
D. I. Af’idah, A. F. Rochim, and E. D. Widianto, “Perancangan Jaringan Sensor Nirkabel (JSN) untuk Memantau Suhu dan Kelembaban Menggunakan nRF24L01+,” J. Teknol. Dan Sist. Komput., vol. 2, no. 4, pp. 267–276, Oct. 2014.
Article Sidebar
Article Details
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
The authors declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.