Feasibility Study Designing Electric Motorcycles With Fossil Fuels Compared To Hybrid Systems On 150Cc Motorcycles

Main Article Content

Pawenary Pawenary
ITN University

Septianissa Azzahra
ITN University

Hastuti Azis
ITN University

Anton Satria Prabuwono
King Abdulaziz University, Saudi Arabia

Keywords

Abstract

In this study, an electric vehicle was designed using fossil fuels compared to the hybrid system on a 150cc motorcycle. The design of electric motorcycle vehicles is focused to know the feasibility study comparison between engine drive and electrical drive. In the design of electric motorcycle vehicles know how to make technical economic calculations on electric motorcycles. And converting energy from mechanical energy into electric energy or vice versa requires a device called an electric motor. Having the knowledge and experience in the manufacture of electric motors will be more useful and become important in the future. Electric vehicles are the solution to the problem of depleting petroleum reserves and pollution problems that increase each year due to exhaust emissions produced by oil-fueled vehicles. contribution of motor vehicle exhaust as a source of air  pollutionreaches  60-70%. The decline of fossil fuels in the world is also a major problem that is currently unresolved. The analytical technique used in this study is a descriptive statistic technique. Where in this study will be carried out an assessment of the technical data that occurs on the calculation of the speed of what motor is in accordance with the specified  standards.

References

[1]"COMPARATIVE ANALYSIS OF EXTRINSIC AND INSTRINSIC MOTIVATION BETWEEN GOJEK DRIVER AND GRAB DRIVER IN MANADO," J. EMBA J. RIS. Ekon. Management, Business and Accounting. , vol. 6, no. 4, 2018, doi: 10.35794/emba.v6i4.21058.
[2] K. Biomantara and H. Herdiansyah, "The Role of Indonesian Railways (KAI) as Urban Area Transportation Infrastructure," J. Hum. Bina Sarana Inform. Horizon, vol. 19, no. 1, 2019.
[3] A. A. Purwati and M. L. Hamzah, "Total service quality management and it's impact on customer satisfaction and loyalty of online transportation in Indonesia," Int. J. Sci. Technol. Res. , vol. 8, no. 11, 2019.
[4] L. A. P.F. De Brito, J.B. Carvalho, and V. D. Toledo, "The efficiency of mathematical algorithms for urban noise evaluation," Urbe, vol. 10, no. 1, 2018, doi: 10.1590/2175-3369.010.001.AO03ISSN2175-3369.
[5] M. Razban and H. I. Talab, "Designing bandar abbas railway station by sustainable architecture approach (Climatic sustainability)," IIOAB J. , vol. 7, 2016.
[6] H. Chang, Y. Wang, Z. Li, B. Lin, Z. Song, and J. Tan, "Regional ecological risk assessment based on nitrogen export: A case study in Chinese Taiwan," Shengtai Xuebao/ Acta Ecol. Sin. , vol. 36, no. 4, 2016, doi: 10.5846/stxb201406031144.
[7] M. Panayotova, "The motor vehicles - A significant cause for air pollution in the big towns of Bulgaria," J. Environ. Sci. Heal. - Part A Toxic/Hazardous Subst. Environ. Eng. , vol. 31, no. 1, 1996, doi: 10.1080/10934529609376349.
[8] P. Podesser, "Unlimited cruising range - How fuel cells empower electric vehicles," in Electric Drive Transportation Association - 23rd Int. Electric Vehicle Symposium and Exposition 2007, EVS 2007 (Battery, Hybrid, Fuel Cell) Conf. Proc. - Sustainability: The Future of Transportation,2007, vol. 2.
[9] M. Latif, A. Valdesio, and M. Muharam, "Electrical Energy from Motorcycle Regenerative Braking using Bicycle Dynamo," J. Nas. Tech. ELEKTRO, vol. 7, no. 2, 2018, doi: 10.25077/jnte.v7n2.503.2018.
[10] G. Jungmeier, The Biorefinery Fact Sheet,vol. 23, no. 1. 2017.
[11] S. S.M, G. S. Tantri, M.M. J, V. Ch, G. G. L, and V. kumar G. Naik, "Intelligent Solar Tracker Vehicle for Supply Channel of Electric Vehicle Need Using Image Processing and Mobile Network," Int. J. Innov. Sci. Res. Technol. , vol. 5, no. 6, 2020, doi: 10.38124/ijisrt20jun1126.
[12] F. Maulana, "ECO-FRIENDLY THREE-WHEELED ELECTRIC VEHICLE DESIGN CONCEPT," Maj. Ilm. Pengkaj. Ind. , vol. 10, no. 2, 2018, doi: 10.29122/mipi.v10i2.141.
[13] Y. Park, H. Kim, H. Jang, S. H. Ham, J. Lee, and D. H. Jung, "Efficiency Improvement of Permanent Magnet BLDC with Halbach Magnet Array for Drone," IEEE Trans. Appl. Supercond. , vol. 30, no. 4, 2020, doi: 10.1109/TASC.2020.2971672.
[14] D. S. Nayak and R. Shivarudraswamy, "Solar fed BLDC motor drive for mixer grinder using a boost converter," Int. A. Power Electron. Syst Drive. , vol. 11, no. 1, 2020, doi: 10.11591/ijpeds.v11.i1.pp56-63.
[15] M. Mahmud, S.M. A. Motakabber, A. H.M. Z. Alam, and A. N. Nordin, "Control BLDC motor speed using PID controller," Int. A. Adv. Comput. Sci. Appl. , vol. 11, no. 3, 2020, doi: 10.14569/ijacsa.2020.0110359.
[16] D. Potnuru, K. Alice Mary, and C. Sai Babu, "Experimental implementation of Flower Pollination Algorithm for speed controller of a BLDC motor," Ain Shams Engineering Journal, vol. 10, no. 2. 2019, doi: 10.1016/j.asej.2018.07.005.
[17] K. Kolano, "Improved sensor control method for BLDC motors," IEEE Access, vol. 7, 2019, doi: 10.1109/ACCESS.2019.2960580.
[18] M. S. Trivedi and R. K. Keshri, "Evaluation of Predictive Current Control Techniques for PM BLDC Motor in Stationary Plane," IEEE Access, vol. 8, 2020, doi: 10.1109/ACCESS.2020.2978695.
[19] D. Kumpanya, S. Thaiparnat, and D. Puangdownreong, "Parameter Identification of BLDC Motor Model Via Metaheuristic Optimization Techniques," Procedia Manuf. , vol. 4, 2015, doi: 10.1016/j.promfg.2015.11.047.

Article Sidebar

PDF
Published
Jul 2, 2021
DOI https://doi.org/10.25077/jnte.v10n2.906.2021

Article Details

How to Cite
Pawenary, P., Azzahra, S., Azis, H., & Prabuwono, A. S. (2021). Feasibility Study Designing Electric Motorcycles With Fossil Fuels Compared To Hybrid Systems On 150Cc Motorcycles. Jurnal Nasional Teknik Elektro, 10(2). https://doi.org/10.25077/jnte.v10n2.906.2021
Issue
Vol 10, No 2: July 2021
Section
Electrical Power and Energy

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

The authors declare that:

1.        This paper has not been published in the same form elsewhere.

2.        It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.

3.        A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.