IoT-Based Disaster Response Robot for Victim Identification in Building Collapses
Main Article Content
Keywords
robot, internet of things, victim identification, building collapses, disaster
Abstract
Natural disasters like earthquakes frequently cause building collapses, trapping many victims under dense rubble. The first 72 hours are crucial for locating survivors, but the dangers of secondary collapse hinder direct access. Teleoperated robots can provide vital visual data to aid rescue efforts, though many prototypes remain constrained by high complexity, cost, and minimal customizability. This work investigates developing an Internet of Things (IoT) integrated disaster response robot that delivers accessible and remotely controllable capabilities for victim identification in hazardous collapse sites. Requirements analysis was conducted through a literature review and first responder interviews to determine the critical capabilities needed. The robot was designed using 3D modeling software and assembled using 3D printed and off-the-shelf components. It features remote-controllable movement, real-time video feed, geopositioning, and remote lighting toggling. Rigorous lab tests validated core functionalities, including camera image acquisition, Bluetooth communication ranges up to 10 meters, and comparable GPS coordinate accuracy to a smartphone. Further field experiments showcased the robot's ability to transmit smooth video signals over distances up to 12 meters and its adeptness at navigating complex terrains, evidenced by its proficient left/right panning and ability to surmount obstacles. An affordable Internet-of-Things integrated disaster robot tailored to victim identification was successfully designed, prototyped, and tested. This robot aids search and rescue operations by delivering visual and spatial data about hard-to-reach victims during the critical hours after disaster strikes. This confirms strong potential, accessibility, and customizability for professional and volunteer urban search and rescue teams across environments and economic constraints.
References
[2] R. Husted, "Evacuation and Rescue Welfare," in Fraser's The Behaviour and Welfare of the Horse: CABI GB, 2022, pp. 210-228.
[3] P. Ambe, S. A. Weber, H. Christ, and D. Wassenberg, "Cholecystectomy for acute cholecystitis. How time-critical are the so called "golden 72 hours"? Or better "golden 24 hours" and "silver 25–72 hour"? A case control study," World Journal of Emergency Surgery, vol. 9, pp. 1-5, 2014.
[4] M. A. Berawi et al., "Increasing disaster victim survival rate: SaveMyLife mobile application development," International Journal of Disaster Risk Reduction, vol. 60, p. 102290, 2021.
[5] M.-Y. Li, X.-J. Zhao, Z.-P. Fan, P.-P. Cao, and X.-N. Qu, "A model for assignment of rescuers considering multiple disaster areas," International journal of disaster risk reduction, vol. 38, p. 101201, 2019.
[6] M. K. C. Arnaouti et al., "Medical disaster response: A critical analysis of the 2010 Haiti earthquake," Frontiers in public health, vol. 10, p. 995595, 2022.
[7] A. Khasawneh, H. Rogers, J. Bertrand, K. C. Madathil, and A. Gramopadhye, "Human adaptation to latency in teleoperated multi-robot human-agent search and rescue teams," Automation in Construction, vol. 99, pp. 265-277, 2019.
[8] M. Aliff, I. Amry, M. Yusof, A. Zainal, A. Rohanim, and N. Sani, "Development of smart rescue robot with image processing (iROB-IP)," International Journal of Electrical Engineering and Technology, vol. 11, no. 9, pp. 08-19, 2020.
[9] C. C. Ulloa, G. T. Llerena, A. Barrientos, and J. del Cerro, "Autonomous 3d thermal mapping of disaster environments for victims detection," in Robot Operating System (ROS) The Complete Reference (Volume 7): Springer, 2023, pp. 83-117.
[10] C. Cruz Ulloa, G. Prieto Sánchez, A. Barrientos, and J. Del Cerro, "Autonomous thermal vision robotic system for victims recognition in search and rescue missions," Sensors, vol. 21, no. 21, p. 7346, 2021.
[11] S. Han et al., "Snake robot gripper module for search and rescue in narrow spaces," IEEE Robotics and Automation Letters, vol. 7, no. 2, pp. 1667-1673, 2022.
[12] A. Murad, O. Bayat, and H. M. Marhoon, "Implementation of rover tank firefighting robot for closed areas based on arduino microcontroller," 2021.
[13] A. Albanese, V. Sciancalepore, and X. Costa-Pérez, "SARDO: An automated search-and-rescue drone-based solution for victims localization," IEEE Transactions on Mobile Computing, vol. 21, no. 9, pp. 3312-3325, 2021.
[14] D. H. Peters, O. Hanssen, J. Gutierrez, J. Abrahams, and T. Nyenswah, "Financing common goods for health: core government functions in health emergency and disaster risk management," Health Systems & Reform, vol. 5, no. 4, pp. 307-321, 2019.
[15] A. Ravendran, P. Ponpai, P. Yodvanich, W. Faichokchai, and C.-H. Hsu, "Design and development of a low cost rescue robot with environmental adaptability," in 2019 international conference on system science and engineering (ICSSE), 2019: IEEE, pp. 57-61.
[16] S. Sharmin, S. I. Salim, and K. R. I. Sanim, "A low-cost urban search and rescue robot for developing countries," in 2019 IEEE International Conference on Robotics, Automation, Artificial-intelligence and Internet-of-Things (RAAICON), 2019: IEEE, pp. 60-64.
[17] S. S. Saha, A. Islam, R. Biswas, and S. Siddique, "MATRO: A robust, low-cost rescue robot designed for rapid deployment in developing countries," in 2021 18th International Conference on Ubiquitous Robots (UR), 2021: IEEE, pp. 417-422.
[18] S. Guo, T.-M. Choi, and S.-H. Chung, "Self-design fun: Should 3D printing be employed in mass customization operations?," European Journal of Operational Research, vol. 299, no. 3, pp. 883-897, 2022.
[19] M. Kumari, A. Kumar, and R. Singhal, "Design and analysis of IoT-based intelligent robot for real-time monitoring and control," in 2020 international conference on power electronics & IoT applications in renewable energy and its control (PARC), 2020: IEEE, pp. 549-552.
[20] R. M. Branch, Instructional design: The ADDIE approach. Springer, 2009.
[21] H. Wang, C. Zhang, Y. Song, B. Pang, and G. Zhang, "Three-dimensional reconstruction based on visual SLAM of mobile robot in search and rescue disaster scenarios," Robotica, vol. 38, no. 2, pp. 350-373, 2020.
[22] J. Cantizani-Estepa et al., "Bluetooth low energy for close detection in search and rescue missions with robotic platforms: An experimental evaluation," IEEE Access, vol. 10, pp. 106169-106179, 2022.
[23] K.-D. Chu, A. Lacaze, K. Murphy, E. Mottern, K. Corley, and J. Frelk, "3D printed rapid disaster response," in 2015 IEEE International Symposium on Technologies for Homeland Security (HST), 2015: IEEE, pp. 1-6.
[24] M. P. Manuel, M. Faied, and M. Krishnan, "A novel lora lpwan-based communication architecture for search & rescue missions," IEEE Access, vol. 10, pp. 57596-57607, 2022.
[25] Y. Yamazaki, M. Tamaki, C. Premachandra, C. J. Perera, S. Sumathipala, and B. Sudantha, "Victim detection using UAV with onboard voice recognition system," in 2019 third IEEE international conference on robotic computing (IRC), 2019: IEEE, pp. 555-559.
Article Sidebar
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
The authors declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.