Submission Preparation Checklist
As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
Authors are able to submit manuscripts to the journal directly through the journal's website by select your role as “Author” in registrasion process. Start the submission process by log in using the username and password that have been registered or the results being sent to the author email. The Author is asked to upload a submission file and to provide metadata or indexing information. Follow the processing steps untill the fifth step and click "finish submission". The final page provides a link to your Active Submissions, also immediately available upon entering OJS as an author.
The authors must refer to JNTE template for writing format and style (Please download JNTE template and use is as initial manuscript template for submission). This will ensure fast publication process. Any papers not fulfilling the requirements based on the guideline to authors will be rejected.
Please be sure to check for spelling and grammar before submitting your paper. Anyone who has made independent contributions to the manuscript should be invited to become a coauthor.
Check the status of your manuscript periodically untill published.
Authors should present their papers honestly without plagiarism or data manipulation. All authors must take public responsibility for the content of their paper.
Basic guidelines for preparing papers for the Jurnal Nasional Teknik Elektro (JNTE) are provided in this section. An example of the desired layout for papers is provided in Microsoft Word template. Please use this JNTE template in order to ensure the correct format of the paper. JNTE papers are limited from six to twelve pages at submission and written in English.
If you plan not to use the template (which is not suggested) please follow this description. Please prepare your paper in single-spaced, double-column format, on A4 paper 21×29.7 centimeters. Set top 46.5 millimeters, bottom and left margins to 20 millimeters, and right margins to about 15 millimeters. Do not violate margins i.e. text, tables, figures, and equations may not extend into the margins. The column width is 81.2 millimeters. The space between the two columns is 12.5 millimeters. Paragraph indentation is 7.5 millimeters. Use full justification. The paper is written in Times New Roman font. The font sizes are bold 16 pt for Paper Title, 12 pt for Author Names, 8 pt for Author Affiliation, Article Information, and Correspondence, 9 pt for body text, 7.5 pt for Abstract, and 9 pt for keywords.
A primary section heading is enumerated by an Arabic numeral followed by full stop and a period and is left align. The first letter of each important word is capitalized.
A secondary section heading is enumerated by an Arabic numeral of its primary section followed by a full stop and the secondary Arabic numeral and is flush left above the section. The first letter of each important word is capitalized.
A tertiary section heading is enumerated by its primary and secondary arabic numeral followed by full stop and the tertiary Arabic numeral. The first letter of the first word is capitalized.
Please do not use all capital fonts for the paper title.
Figures and Tables
Please make sure the axis titles of your graph well presented with their units. Put the titles of your figure below the figures and the titles of tables before the tables. Do not put borders around your figures. Large figures and tables may span both columns, but may not extend into the page margins. Put figure or table numbers according their appearance using Arabic numeral.
Use Microsoft Word equation editor to type the equations. Number equations consecutively with equation numbers in parentheses flush with the right margin. Be sure that the symbols in your equation have been defined before the equation appears or immediately following.
Parts of the Paper
The paper at least consist of the following section/item
The paper title should be in uppercase and lowercase letters, not all uppercase.
The name of each author must appear on the paper. Full names of authors are preferred in the author line, but are not required. Do not use all uppercase for authors' surnames. The affiliation of each author must also appear. For foreign authors, please include the countries in the affiliations. The corresponding author email is preferred using institutional email address.
The abstract is limited to 150–200 words and cannot contain equations, figures, tables, or references. It should concisely state the aim of the research, method/approach used, principal results, and their significance.
The author shall provide up to 10 keywords to help identify the major topics of the paper.
Nomenclature (if needed)
A nomenclature list should precede the Introduction.
Introduction consist of background or problem and its significance of the research. It also should clearly states the purpose of the research, gap analysis and hypothesis (if any). When describing gap analysis please provide references for other related previous works and clearly state the position of the research to other literature.
This section explain detail of the research methods. The detail must sufficient for other to reproduce the research.
Results and discussions
The section address connections between findings and basic concepts or hypothesis made earlier. Authors should also express whether any arguments were needed relating to other works from other researchers. Write implications made by the work related to theoretical or applications. Write results in logical sequence.
The conclusion should be linked to the title and objectives of the study. Do not make statements not adequately supported by your findings. Do not use bulleted points, use paragraphed sentences instead
Appendix (if needed)
Appendixes appear before the acknowledgment.
Acknowledgment (if needed)
Financial support should be stated in acknowledgment. For example: This work was supported in part by the Indonesian Department of XXX under Grant BS123
References are important to the reader; therefore, each citation must be complete and correct. Please use citation software such as Endnote and Mendeley. List only one reference per reference number. If a reference is available from two sources, each should be listed as a separate reference. Give all authors' names; do not use et al. Use IEEE reference style.
Samples of the correct formats for various types of references are given below.
Basic format for books:
 J. K. Author, “Title of chapter in the book,” in Title of His Published Book, xth ed. City of Publisher, Country if not USA: Abbrev. of Publisher, year, ch. x, sec. x, pp. xxx–xxx.
 G. O. Young, “Synthetic structure of industrial plastics,” in Plastics, 2nd ed., vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, pp. 15–64.
 W.-K. Chen, Linear Networks and Systems. Belmont, CA: Wadsworth, 1993, pp. 123–135.
Basic format for periodicals:
 J. K. Author, “Name of paper,” Abbrev. Title of Periodical, vol. x, no. x, pp. xxx–xxx, Abbrev. Month, year.
 J. U. Duncombe, “Infrared navigation—Part I: An assessment of feasibility,” IEEE Trans. Electron Devices, vol. ED-11, no. 1, pp. 34–39, Jan. 1959.
 E. P. Wigner, “Theory of traveling-wave optical laser,” Phys. Rev., vol. 134, pp. A635–A646, Dec. 1965.
 E. H. Miller, “A note on reflector arrays,” IEEE Trans. Antennas Propagat., to be published.
Basic format for reports:
 J. K. Author, “Title of report,” Abbrev. Name of Co., City of Co., Abbrev. State, Rep. xxx, year.
 E. E. Reber, R. L. Michell, and C. J. Carter, “Oxygen absorption in the earth’s atmosphere,” Aerospace Corp., Los Angeles, CA, Tech. Rep. TR-0200 (4230-46)-3, Nov. 1988.
 J. H. Davis and J. R. Cogdell, “Calibration program for the 16-foot antenna,” Elect. Eng. Res. Lab., Univ. Texas, Austin, Tech. Memo. NGL-006-69-3, Nov. 15, 1987.
Basic format for handbooks:
 Name of Manual/Handbook, x ed., Abbrev. Name of Co., City of Co., Abbrev. State, year, pp. xxx–xxx.
 Transmission Systems for Communications, 3rd ed., Western Electric Co., Winston-Salem, NC, 1985, pp. 44–60.
 Motorola Semiconductor Data Manual, Motorola Semiconductor Products Inc., Phoenix, AZ, 1989.
Basic format for books (when available online):
 Author. (year, month day). Title. (edition) [Type of medium]. volume (issue). Available: site/path/file
 J. Jones. (1991, May 10). Networks. (2nd ed.) [Online]. Available: http:// www.atm.com
Basic format for journals (when available online):
 Author. (year, month). Title. Journal. [Type of medium]. volume (issue), pages. Available: site/path/file
 R. J. Vidmar. (1992, Aug.). On the use of atmospheric plasmas as electromagnetic reflectors. IEEE Trans. Plasma Sci. [Online]. 21(3), pp. 876–880. Available: http:// www.halcyon.com/pub/journals/21ps03-vidmar
Basic format for papers presented at conferences (when available online):
 Author. (year, month). Title. Presented at Conference title. [Type of medium]. Available: site/path/file
 PROCESS Corp., MA. Intranets: Internet technologies deployed behind the firewall for corporate productivity. Presented at INET96 Annual Meeting. [Online]. Available: http:// home.process.com/Intranets/wp2.htp
Basic format for reports and handbooks (when available online):
 Author. (year, month). Title. Company. City, State or Country. [Type of medium]. Available: site/path/file
 S. L. Talleen. (1996, Apr.). The Intranet Architecture: Managing information in the new paradigm. Amdahl Corp., CA. [Online]. Available: http:// www.amdahl.com/doc/products/bsg/intra/infra/html
Basic format for computer programs and electronic documents (when available online): ISO recommends that capitalization follow the accepted practice for the language or script in which the information is given.
 A. Harriman. (1993, June). Compendium of genealogical software. Humanist. [Online]. Available e-mail: HUMANIST@ NYVM.ORG Message: get GENEALOGY REPORT
Basic format for patents (when available online):
 Name of the invention, by inventor’s name. (year, month day). Patent Number [Type of medium]. Available: site/path/file
 Musical toothbrush with adjustable neck and mirror, by L. M. R. Brooks. (1992, May 19). Patent D 326 189 [Online]. Available: NEXIS Library: LEXPAT File: DESIGN
Basic format for conference proceedings (published):
 J. K. Author, “Title of paper,” in Abbreviated Name of Conf., City of Conf., Abbrev. State (if given), year, pp. xxx–xxx.
 D. B. Payne and J. R. Stern, “Wavelength-switched passively coupled single-mode optical network,” in Proc. IOOC-ECOC, 1985, pp. 585–590.
Example for papers presented at conferences (unpublished):
 D. Ebehard and E. Voges, “Digital single sideband detection for interferometric sensors,” presented at the 2nd Int. Conf. Optical Fiber Sensors, Stuttgart, Germany, Jan. 2–5, 1984.
Basic format for patents:
 J. K. Author, “Title of patent,” U.S. Patent x xxx xxx, Abbrev. Month, day, year.
 G. Brandli and M. Dick, “Alternating current fed power supply,” U.S. Patent 4 084 217, Nov. 4, 1978.
Basic format for theses (M.S.) and dissertations (Ph.D.):
 J. K. Author, “Title of thesis,” M.S. thesis, Abbrev. Dept., Abbrev. Univ., City of Univ., Abbrev. State, year.
 J. K. Author, “Title of dissertation,” Ph.D. dissertation, Abbrev. Dept., Abbrev. Univ., City of Univ., Abbrev. State, year.
 J. O. Williams, “Narrow-band analyzer,” Ph.D. dissertation, Dept. Elect. Eng., Harvard Univ., Cambridge, MA, 1993.
 N. Kawasaki, “Parametric study of thermal and chemical nonequilibrium nozzle flow,” M.S. thesis, Dept. Electron. Eng., Osaka Univ., Osaka, Japan, 1993.
Basic format for the most common types of unpublished references:
 J. K. Author, private communication, Abbrev. Month, year.
 J. K. Author, “Title of paper,” unpublished.
 J. K. Author, “Title of paper,” to be published.
 A. Harrison, private communication, May 1995.
 B. Smith, “An approach to graphs of linear forms,” unpublished.
 A. Brahms, “Representation error for real numbers in binary computer arithmetic,” IEEE Computer Group Repository, Paper R-67-85.
Basic format for standards:
 Title of Standard, Standard number, date.
 IEEE Criteria for Class IE Electric Systems, IEEE Standard 308, 1969.
 Letter Symbols for Quantities, ANSI Standard Y10.5-1968.
Biographies consist of full name, higher educations, occupation and field of interest. Do not put photograph.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
The authors declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.