Pengembangan Topologi Inverter Multilevel Tiga Tingkat Satu Fasa Tipe Dioda Clamped dengan Mereduksi Komponen Saklar Daya

Main Article Content

Hendi Matalata
Universitas Andalas

Muh. Imran Hamid
Universitas Andalas

Keywords

Abstract

Multilevel inverter is a converter which converts the DC power source into an AC power source with a voltage output of more than two levels. Conventional multilevel inverter topology for the three levels developed at this time generally uses four components of the power switch. In this paper presented a three-level multilevel inverter topology by reducing the power switch components into two pieces and named as the type of diode clamped multilevel inverter three level one phase. Simulation with MATLAB have shown the many advantages of this topology is compared with the existing topology. Furthermore topology realized in order to determine their performance in real terms. Tests have shown the prospects of this topology to be applied to a variety of purposes.

Keywords: Multilevel Inverter, Diodes clamped, Components Power Switch, Reduction

 

Abstrak - Inverter multilevel adalah konverter yang mengubah sumber listrik DC menjadi sumber listrik AC dengan keluaran tegangan lebih dari dua tingkat. Topologi konvensional inverter multilevel untuk tiga tingkat yang berkembang saat ini umumnya menggunakan empat komponen saklar daya. Dalam paper ini diketengahkan sebuah topologi inverter multilevel tiga tingkat dengan mereduksi komponen saklar daya menjadi dua buah dan dinamakan sebagai inverter multilevel tipe diode clamped tiga tingkat satu phasa. Simulasi dengan MATLAB yang telah dilakukan menunjukkan berbagai kelebihan topologi ini dibandingakan dengan topologi yang ada sebelumnya. Selanjutnya topologi direalisasikan untuk dapat mengetahui unjuk kerjanya secara ril. Pengujian yang dilakukan menunjukkan prospek topologi ini untuk dapat diaplikasikan pada berbagai keperluan.

Kata kunci: Inverter Multilevel, Dioda Clamped,  Komponen Saklar Daya, Reduksi

References

[1] R. A. Ahmed and H. W. Ping, “New multilevel inverter topology with reduced number of switches,” Proccediing of the International Midldle East Power System Conference(MEPCON’10), Cairo, pp. 565–570, 2010.
[2] A. S. J. Bitar and I. F. Crowley, “PWM Techniques : A Pure Sine Wave Inverter,” Major Qualifying Project, Worcester, 2011.
[3] M. Sukmawidjaja, “ELIMINASI HARMONIK GUNA PERBAIKAN,” JETri, vol. 6, no. 1, pp. 9–32, 2006.
[4] V. Sahu and S. Kaushik, “A New Five-Level Diode Clamp Multilevel Inverter Topology,” Int. J. Creat. Res. Thoughts, vol. 1, no. 4, pp. 2–5, 2013.
[5] M. Derakhshanfar, “Analysis of different topologies of multilevel inverters,” CHALMER UNIVERSITY OF TECHNOLOGY, 2010.
[6] P. Studi, T. Listrik, J. T. Elektro, P. N. Padang, J. T. Elektro, F. Teknik, and U. Andalas, “DESAIN RANGKAIAN GATE-DRIVER UNTUK KONVERTER YANG BEKERJA DENGAN VOLTAGE MODE CONTROL,” jnte, vol. 5, no. 2, pp. 1–6, 2016.
[7] E. aptono Triyuwono, “Inverter Multi Level Tipe Jembatan Satu Fasa Tiga Tingkat,” TRANSMISI, vol. 13, no. 4, pp. 135–140, 2011.
[8] T. Vol- and E. Engineering, “A Single Phase Diode Clamped Multilevel Inverter and its Switching Function,” J. Innov. trends Sci. Pharm. Technol., vol. 1, no. 1, pp. 2–5, 2014.

Article Sidebar

PDF
Published
Nov 1, 2016
DOI https://doi.org/10.25077/jnte.v5n3.314.2016

Article Details

How to Cite
Matalata, H., & Hamid, M. I. (2016). Pengembangan Topologi Inverter Multilevel Tiga Tingkat Satu Fasa Tipe Dioda Clamped dengan Mereduksi Komponen Saklar Daya. Jurnal Nasional Teknik Elektro, 5(3), 360–367. https://doi.org/10.25077/jnte.v5n3.314.2016
Issue
Vol. 5 No. 3: November 2016
Section
Electrical Power and Energy

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

The authors declare that:

1.        This paper has not been published in the same form elsewhere.

2.        It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.

3.        A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.