Incubator for Joper Day Old Chicks with Cohen-Coon PID Controller
##plugins.themes.bootstrap3.article.main##
Keywords
Day Old Chick, PID, Cohen-Coon, Joper Chicken
Abstract
Joper (Jowo Super) chicken parents are generally unable to incubate eggs or provide adequate care for their offspring, making the use of a specialized incubator essential from the hatching phase to Day-Old Chick (DOC) rearing. One of the primary factors contributing to DOC mortality is improper temperature adjustment in the heating system. To ensure optimal early-age development, Joper DOC requires a stable thermal environment within the range of 32°C to 35°C, depending on the growth stage. This study aims to develop an incubator capable of maintaining a constant temperature of 32 °C using Cohen-Coon PID (C-C PID) control while also regulating humidity levels. The proposed incubator integrates an axial fan and an L298N driver, with the temperature and humidity sensors calibrated prior to use. The calibration results show measurement errors of 0.59% for temperature and 5.02% for humidity, indicating high reliability. The application of C-C PID control demonstrates strong performance, characterized by a short rise time (approximately 225 seconds), an acceptable settling time (around 510 seconds), minimal overshoot (1.56%), and a steady-state error approaching 0%. During a 30-minute evaluation period, the system successfully maintained a stable temperature at the 32 °C set point and controlled humidity at below 50% automatically. Furthermore, the incubator design proved effective in practical use, achieving a 0% mortality rate for Joper DOC.
References
[2] D. . Afiyah, Supriyoni, R. . Sarbini, and I. N. . Rosikhulhaj, “Pengaruh Substitusi Tepung Jerami Bawang Merah terhadap Performa Produksi Ayam Joper,” SENACENTER, no. 38, pp. 61–65, 2022, https://doi.org/10.32503/senacenter.v1i1.12.
[3] N. Kaleka, "Beternak Ayam Kampung Super dan Jawa Super Tanpa Bau," Yogyakarta Arcitra, 1st ed., pp. 1-192, ISBN: 978-602-784-941-9, 2015, https:// balaiyanpus.jogjaprov.go.id/opac/detail-opac?id= 318931.
[4] M. N. Wahid, L. A. Lukito Afandy, P. Slamet, and N. A. Basyarach, “Pengendali Suhu Ruang Inkubator Doc Berbasis Plc,” El Sains J. Elektro, vol. 1, no. 2, pp. 1–5, 2020, https://doi.org/10.30996/elsains.v1i2.3192.
[5] F. H. Mustianto, Asni Tafrikhatin, and Ajeng Tiara Wulandari, “Rancang Bangun Pengatur Suhu Kandang Ayam Otomatis Menggunakan Sensor DHT22 Berbasis Wemos D1 R32 Dengan Keluaran Berupa LCD dan Notifikasi Telegram,” JASATEC J. Students Automotive, Electron. Comput., vol. 2, no. 1, pp. 9–19, 2023, https://doi.org/10.37339/jasatec.v2i1.1237.
[6] N. Haidar Hari and I. Darmawan, “Sistem Pengontrol Suhu Pada Kandang Brooding Dengan Logika Fuzzy Menggunakan Arduino Uno Berbasis Mobile,” J. Responsif Ris. Sains dan Inform., vol. 5, no. 1, pp. 43–51, 2023, https://doi.org/10.51977/jti.v5i1.1049.
[7] Suliono, Sunariyo, And F. Wadjdi, “Pengaruh Suhu Brooder Terhadap Suhu Tubuh, Bobot Badan dan Pertumbuhan Bulu Sayap Primer Ayam Parentstock Strain Cobb Umur Satu Minggu,” J. Din. Rekasatwa, vol. 5, no. 3, pp. 255–258, 2022, https:// jim.unisma. ac.id/index.php/fapet/article/view/18232.
[8] T. Hadyanto and M. F. Amrullah, “Sistem Monitoring Suhu dan Kelembaban pada Kandang Anak Ayam Broiler Berbasis Internet Of Things.” J. Teknologi dan Sistem Tertanam, vol. 03, no. 02, pp. 9-22, 2022, https://ejurnal.teknokrat.ac.id/index.php/jtst/article/view/2179.
[9] R. Y. Parapat, E. Sandjaya, S. A. Nurfadhilah, M. M. Fetok, N. Hikmah, and Salafffudin, “Kesejahteraan Ayam Broiler Pada Sistem Kandang Free-Range dan Kandang Tertutup (Closed-House)", Scientica: J.Ilmiah Sains dan Teknologi vol. 3, no. 2, pp. 657-664, 2024, https://jurnal.kolibi.org/index.php/scientica/article/view/4547.
[10] Zulfachmi and A. Nong, “Kajian Performa Ayam Broiler Berdasarkan Iklim Mikro pada Kandang Closed House Evaporated Cooling Pad System,” SNISTEK, vol. 4, pp. 1-7, 2022, https://ejournal.upbatam.ac.id/index. php/prosiding/article/view/5195.
[11] M. I. Maulana, D. Garnida, I. Setiawan, and Y. Yudantara, “Kajian Performa Ayam Broiler Berdasarkan Iklim Mikro pada Kandang Closed House Evaporated Cooling Pad System,” J. Anim. Husb. Sci., vol. 8, no. 2, pp. 74–86, 2024, https://doi.org/ 10.52434/janhus.v8i2.3495.
[12] A. Febriawan and W. S. Aji, “Rotating Control on Robots Indonesian Abu Robot Contest with PID and IMUBNO055 Controls,” Bul. Ilm. Sarj. Tek. Elektro, vol. 2, no. 1, p. 14, 2020, https://doi.org/10.12928/ biste.v1i3.987.
[13] H. Supriyono, F. F. Alanro, and A. Supardi, “Development of DC Motor Speed Control Using PID Based on Arduino and Matlab For Laboratory Trainer,” J. Nas. Tek. Elektro, vol. 1, pp. 36–41, 2024, https://doi.org/10.25077/jnte.v13n1.1155.
[14] C. T. Chao, N. Sutarna, J. S. Chiou, and C. J. Wang, “An optimal fuzzy PID controller design based on conventional PID control and nonlinear factors,” Appl. Sci., vol. 9, no. 6, 2019, https:// doi.org/10.3390/ app9061224.
[15] A. Ma’arif, R. Istiarno, and S. Sunardi, “Kontrol Proporsional Integral Derivatif (PID) pada Kecepatan Sudut Motor DC dengan Pemodelan Identifikasi Sistem dan Tuning,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 9, no. 2, p. 374, 2021, https://doi.org/10.26760/elkomika.v9i2.374.
[16] A. Ma, R. Dwi Puriyanto, N. Maharani Raharja, and S. Nurindra Rahmadhia, “Arduino Embedded Control System of DC Motor Using Proportional Integral Derivative,” SERSC Int. J. Control Autom., vol. 13, no. 4, pp. 658–667, 2020, https://sersc.org/journals/ index.php/IJCA/article/view/18854.
[17] A. Latif, K. Shankar, and P. T. Nguyen, “Legged Fire Fighter Robot Movement Using PID,” Journal of Robotics and Control (JRC), vol. 1, no. 1, pp. 15–18, 2020, https://doi.org/10.18196/jrc.1104.
[18] J. de Souza Granja Barros, L. A. Rossi, and Z. Menezes de Souza, “PID temperature controller in pig nursery: spatial characterization of thermal environment,” Int. J. Biometeorol., vol. 62, no. 5, pp. 773–781, 2018, https://doi.org/10.1007/s00484-017-1479-x.
[19] M. I. Rusydi, “Optimasi Pengendali PID pada Pesawat Autopilot Berbasiskan Algoritma Genetika,” J. Nas. Tek. Elektro, vol. 5, no. 2, p. 217, 2016, https://doi.org/10.25077/jnte.v5n2.267.2016.
[20] M. R. Djalal, H. Nurohmah, A. Imran, and M. Y. Yunus, “Aplikasi Metode Cerdas untuk Optimasi Controller PID Motor DC Berbasis Firefly Algorithm,” J. Nas. Tek. Elektro, vol. 6, no. 2, p. 76, 2017, https://doi.org/10. 25077/jnte.v6n2.393.2017.
[21] L. S. Mezher, “Position control for dynamic DC MOTOR with robust PID controller using MATLAB,” Int. J. Adv. Trends Comput. Sci. Eng., vol. 8, no. 3, pp. 936–942, 2019, https://doi.org/10.30534/ijatcse/2019/ 92832019.
[22] R. Bitriá and J. Palacín, “Optimal PID Control of a Brushed DC Motor with an Embedded Low-Cost Magnetic Quadrature Encoder for Improved Step Overshoot and Undershoot Responses in a Mobile Robot Application,” Sensors, vol. 22, no. 20, 2022, https://doi.org/10.3390/s22207817.
[23] T. Alamirew, V. Balaji, and N. Gabbeye, “Design of model predictive controller for pasteurization process,” Indones. J. Electr. Eng. Informatics, vol. 5, no. 2, pp. 137–144, 2017, https://doi.org/10.11591/ijeei.v5i2.279.
[24] T. Suksawat, and P. Kaewpradit, “Comparison of Ziegler-Nichols and Cohen-Coon Tuning Methods: Implementation to Water Level Control Based MATLAB and Arduino,” Eng.J.CMU, vol. 28, no. 1, pp. 153-168, 2021, https://ph01.tci-thaijo.org/index.php/ EngJCMU/article/view/243443.
[25] M. Supriyanto and D. Rahmawati, “Rancang Bangun Inkubator Anak Ayam Doc (Day Old Chick) Otomatis Berbasis Mikrokontroler,” JE-Unisla, vol. 5, no. 1, pp. 315-320, 2020, https://doi.org/10.30736/je.v5i1.419.
##plugins.themes.bootstrap3.article.sidebar##
##plugins.themes.bootstrap3.article.details##
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
The authors declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.