Propagasi Indoor Gelombang Radio Perangkat XBEE di Rumah Sakit Ibu dan Anak Budhi Mulia Pekanbaru

Main Article Content

Fadhli Palaha
Prodi S2 Teknik Elektro Univertsitas Andalas

Zaini .
Universitas Andalas

Keywords

Abstract

The aim of this study is to know the propagacy reading of radio frequency in a building oriented to objects by using Xbee peripheral. There are some factors influenced the accuracy of this peripheral while measuring the RSSI signal. To do this propogacy reading of radio frequency used Zigbee IEEE 802.15.4 wireless network. This network has the cheaper cost in technology. This propogacy is applied with a tool designed and functioned as Tx (sender) and the Rx (receiver) whereas each of the Tx and Rx has its own component parts.The results of the reading of this RSSI signal is if there are so many barriers that blocks, the signal strength is very small. And if there is a little barrier that blocks, the signal strength is very big. The reading of data XBee-shaped in dbm can be seen through a software called ZiggBee Operator.

Keywords: Signal of Radio Frequency RSSI, indoor construction, XBee, Zigbee

 


Abstrak

Penelitian ini bertujuan untuk mengetahui pembacaan propagasi frekuensi radio (sinyal RSSI) dalam gedung yang berorientasikan objek dengan menggunakan perangkat XBee. Terdapat beberapa faktor yang mempengaruhi kinerja perangkat ini ketika mengukur sinyal RSSI.Untuk melakukan pembacaan propagasi frekuensi radio ini digunakan metode jaringan nirkabel Zigbee IEEE 802.15.4. Jaringan ini menggunakan biaya teknologi yang efektif jauh lebih ringan. Propagasi frekuensi radio XBee ini diaplikasikan dengan sebuah alat yang dirancang dan berfungsi sebagai Tx (pengirim) dan  Rx (penerima) yang masing-masing Tx dan Rx ini mempunyai bagian komponen sendiri. Dari hasil pengujian pembacaan sinyal RSSI ini dapat disimpulkan bahwa jika banyak yang menghalangi, maka kekuatan sinyalnya sangat kecil. Sebaliknya jika yang menghalanginya sedikit, maka kekuatan sinyalnya sangat besar. Hasil pembacaan data Xbee yang berbentuk –dbm ini bisa dilihat melalui perangkat lunak ZiggBee Operator.

Kata Kunci: Sinyal Radio Frequency RSSI, Konstruksi bangunan bagian dalam, XBee, Zigbee

 

References

M. Hassan Jamil, Abid Ali Tahir, Ahmad Mudassir and Shakeebur Rehman IMPLEMENTASION OF REAL TIME LOCATION SYSTEM (RTLS) OF BLIND OBJECT USING ZIGBEE NETWORKWorld Applied Sciences Journal 20 (11): 1534-1537, 2012.ISSN 1818-4952
[2].Sharly Joana Halder, Joon-Goo Park,and Wooju Kim,Yonsei University, Seoul, Kyungpook National University, Daegu Republic of Korea . ADAPTIVE FILTERING FOR INDOOR LOCATION USING Zigbee RSSI AND LQI MEASUREMENT.
[3].Goran Horvat, Damir Šoštarić, Drago ŽagarPower Consumption and RF Propagation Analysis on ZigBee XBeeModules for ATPC
[4].S.R. Vijayalakshmi and S. Muruganand.”REALl-TIME MONITORING OF UBIQUITOUS WIRELESS ECG SENSOR NODE FOR MEDICAL CARE USING ZIGBEE”.International Journal of Electronics. Vol. 99, No. 1, January 2012, 79–89
[5]. Ummi Nurulhaiza Za’bahand O.Sidek .DISTANCE VERIFICATION FOR WIRELESS ENVIRONMENT MONITORING SYSTEM USING RSSI.
[6].Thanapong Chuenurajit, DwiJoko Surosoand Panarat Cherntanomwong. IMPLEMENTATION OF RSSI-BASED 3D INDOOR LOCALIZATION USING WIRELESS SENSOR NETWORKS BASED ON ZIGBEE STANDART.
[7].Amine CHERIET, Mohamed USLIM, Kamel AIZI .University of science and Technology Oran USTOMB . “LOCALIZATION IN A WIRELESS SENSOR NETWORK BASED ON RSSI AND ADECISION TREE”.
[8].S. A. Mitilineos, D. M. Kyriazanos, O. E. Segou,J. N. Goufas and S. C. A. Thomopoulos.”INDOOR LOCALIZATION WITH WIRELESS SENSOR NETWORKS”.Progress In Electromagnetics Research, Vol. 109, 441{474, 2010}.
[9]. Theodore S.Rappaport. “WIRELESS COMMUNICATIONS – PRICIPLES AND PRACTICE.

Article Sidebar

PDF
Published
Sep 1, 2014
DOI https://doi.org/10.25077/jnte.v3n2.79.2014

Article Details

How to Cite
Palaha, F., & ., Z. (2014). Propagasi Indoor Gelombang Radio Perangkat XBEE di Rumah Sakit Ibu dan Anak Budhi Mulia Pekanbaru. Jurnal Nasional Teknik Elektro, 3(2), 148–156. https://doi.org/10.25077/jnte.v3n2.79.2014
Issue
Vol. 3 No. 2: September 2014
Section
Electrical Power and Energy

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
    2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
    3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

The authors declare that:

1.        This paper has not been published in the same form elsewhere.

2.        It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.

3.        A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.